TOP 12: the best manufacturers of cast iron bathtubs

Cast iron bathtub It can serve for decades, unless, of course, a number of conditions are met. The walls of the product must be thick enough, and the enamel must be applied in the correct way. There are a number of other requirements for the production process, but these two are the most important. Unfortunately, it is difficult for an ordinary buyer, especially under the influence of the entreaties of experienced sellers, to determine the quality of individual samples, so it remains to rely on the name of the manufacturer. Responsible companies do not save on materials, use modern equipment and technologies, give a guarantee on their products and supply it with relevant documentation. What are the best manufacturers of cast-iron bathtubs at the moment? What products can be trusted? Let's try to understand these issues by studying the plumbing market.

Roca

Spanish company Roca is today considered the largest producer of cast-iron bathtubs. The plant's products are known throughout Europe, in great demand in the post-Soviet space. The history of the company began more than a century ago. At first, a small enterprise near Barcelona produced radiators, then they started making boilers, and in 1929 they made the first bath. Despite the fact that the products were in good demand in Spain, the manufacturer was in no hurry to enter the international market. This happened only in 1990, and in 2006, Roca became the world leader in the production of sanitary ware and tiles.

Today the company includes more than 70 enterpriseslocated in different corners of the planet. Deliveries are made to 135 countries. In 2004, the company began to build its plant in 2004, which was launched in 2006. Today, the manufacturer makes not only plumbing, but also tilefurniture and fixtures.

The cast-iron bathtubs of the company are of the highest quality and pleasant design. You can find both fairly simple models and exquisite bathtubs. All products are created on modern equipment using advanced technologies. Enamel quality is excellent. Manufacturer bathtubs get anti-slip coating. Prices, for products of such high quality, are acceptable, and constantly updated collections allow everyone to find a suitable product.

Jacob delafon

History of this french company begins in 1889. Then its founders foresaw an increase in hygiene requirements. Production began with enameled refractory ceramics. Things were going well, and later several more factories became the property of the company. Then the company became part of a large French concern, and in 1986 was acquired by the American concern Kohler Co. Nevertheless, cast-iron bathtubs are still sold under the Jacob Delafon brand, and it is with this name that they have become known around the world.

Today, the company's products are synonymous with quality and exclusive design. Each item is provided 25 year warranty. The range of baths is striking: there are both fairly simple models, and asymmetric bowls, bathtubs with hydromassage. They stand, of course, not cheap, but they fully work out the money spent on them. Special mention deserves designer models of an unusual shape, on legs or with a painting.

Novial

Spanish company Novial began operating in 1958 and specialized in iron castings.The first cast-iron baths were made here in 1967, and already in 1970 this became the main activity of the young company. Until 1991, the plant was located in Spain, but later the government of the country decided to move all the enterprises outside the cities. Then all production facilities moved to China. A new modern plant was built there, which is 100% consistent with all international standards. Today, Novial cast-iron bathtubs are successfully sold in 20 countries, and the market is constantly expanding.

The manufacturer uses modern vitreous titanium enamel and French stove equipment. The enamel is fired in infrared furnaces, so there is no doubt about its quality and durability. On Novial baths 25 year warranty, which is not surprising with this quality of production. There are quite simple models on sale, hydromassage bathtubs and exclusive design. Products are presented in different sizes, so that everyone can find the right model. At the same time, products are cheaper than many other European manufacturers, which ensures its popularity in the domestic market. All this allows us to call the Spanish company one of the best manufacturers of cast-iron bathtubs.

Oxame

This french company He has almost a century of experience in the production of cast-iron bathtubs. During this time, their own traditions were formed, which explains such a high quality of the company's products. Production facilities are located in France. The manufacturer, despite the fashion to transfer production to China, decided to leave the plant in Europe in order to exercise maximum control over the production process.

The company uses the most modern technology. Enamel is applied in a special way., creating an incredibly durable and resistant to negative environmental factors coating. The snow-white enamel on the Oxame bathrooms seems to even sparkle. In addition, products are supplied anti-slip coating, some models receive chrome handles, head restraints and other elements that make the operation process more comfortable.

The manufacturer's range of bathtubs has enough products that differ in size, shape and equipment. The price also varies significantly, but very simple models are not so expensive.

Elegansa

German company specializes mainly in the production of cast-iron bathtubs in retro style. Products of the manufacturer are striking in appearance and worthy to become an adornment of any bathroom. Models are made in different colors, impressive unusual shapes and openwork legs. The company also produces accessories suitable for such bathtubs.

Production facilities are located in Germany, the manufacturing process at all its stages is closely monitored. All products are covered with high-quality enamel, problems with which customers will not have at least the next 30 years. The lineup is constantly updated with new products, but there are a lot of bathtubs, as you might guess.

Timo

Finnish company gained fame due to the exceptional quality of the enamel coating of the bathtubs. Manufacturer It is applied in 7 layers, the total thickness of the enamel reaches 3 mm. The protective coating resists shock, mechanical damage and corrosion, facilitates the care of the bathroom and extends its service life. Externally, the bathtubs are covered with a layer of primer, resistant to moisture.

Timo's range of cast-iron bathtubs includes mostly simple models with no design twist. Some bathtubs receive handles and head restraints. The bottom of almost all models has anti-slip notches that make water procedures not only pleasant, but also safe. In terms of size, there is a variety, so you can choose a model for almost every room. However, the smallest bathtubs with a length of 120-130 cm are not available here.The prices are very reasonable, manufacturer warranty - 5 years.

RECOR

Portuguese company RECOR Metalurgica cast iron bathtubs and shower trays. Products have established themselves in several European countries, as well as in the domestic space. The company is distinguished by the use of special enamel with a high content of titanium ions, which allows us to talk about the service life of such a coating of 70 years. For each bath is provided passport and warranty card. The warranty period is significant. - 25 years.

The lineup is often updated with new products. On sale you can find bathtubs that will be a great addition to any interior style. Exclusive products on carved legs complement the spacious bathtub in a classic style, while streamlined bathtubs decorate the modern interior. Manufacturer products are expensive.

Castalia

Italian company Castalia produces quality, attractive, and relatively inexpensive bathtubs. For covering uses titanium-containing enamel, bowls always have an ergonomic shape. The manufacturer pays great attention to detail, so that in terms of aesthetics, bathtubs are as good as in terms of convenience. The company produces models with a length of 120 to 180 cm, so finding a product with dimensions corresponding to the bathroom will not be difficult. Prices, recall, are reasonably reasonable.

Artex

Cast iron bathtubs Artex made in chinabut the factories use unique Italian technology, Italian design and European equipment. This approach allows us to produce the highest quality bathtubs at the lowest possible prices, which have already been appreciated by numerous buyers.

The length of the baths ranges from 120 to a record 200 cm, width - from 70 to 85 cm, depth - from 42 to 50 cm. It is not difficult to choose a model that best matches the parameters of your home. In terms of design, variety is also observed, but mostly simple models are produced, devoid of all kinds of frills.

Each item receives seven layer coating, containing silver oxide. It looks great, retains its original properties for a long time and allows you to disinfect water.

Goldman

Another one of a little responsible Chinese manufacturers. The company covers cast-iron bathtubs three layers of enamel containing titanium. Over the years, the coating does not turn yellow, does not crack, and the baths themselves are very inexpensive. The combination of these qualities and provided products under the Goldman brand quite high popularity. Many models of the manufacturer receive an anti-slip coating, but it is necessary to care for it as carefully as possible so that there are no dark spots. When buying Goldman bathtubs, experts advise inspecting the coating for integrity, as well as examining the quality of the legs. If you compare the quality of these bathtubs and European-made analogues, then the Chinese models lose a little, but they cost several times less, and their service life is quite high.

OJSC "Universal Plant"

Domestic manufacturers ready to compete with foreign products. Plant in Novokuznetsk works since 1961. This means that a good half of all Soviet cast-iron bathtubs came off the assembly line of this manufacturer. Since then, the plant has been repeatedly upgraded. Today's production lines equipped with high-quality German equipment, and the molding of bathtubs takes place according to Japanese vacuum technology.

Every bath gets three-layer enamel coatingwhich provides products with a long service life. The lineup is represented by products of different lengths, widths and shapes. There are bathtubs with headrest and handles. Snow-white titanium enamel, thoughtful forms and low price - these are the main factors that explain the popularity of the manufacturer's products. Bathtubs are, indeed, very inexpensive, and even with the most modest budget, you can afford a good product.

Kirovsky Zavod OJSC

Another major domestic enterprisespecializing in the production of cast-iron bathtubs. The history of the plant begins in the distant 1745. During this time, the company has changed its field of activity several times. Today the plant is equipped with modern German equipment and produces high-quality cast-iron bathtubs, which are practically not inferior to European counterparts and comply with all domestic requirements.

All bathtubs produced in this factory receive silver ionized enamel coating. The coating strikes durability and disinfects water throughout the life of the bath.

The manufacturer's assortment includes bathtubs of various sizes, lengths from 120 to 170 cm. There are both simple models and bathtubs equipped with handles, head restraints and hydromassage. In terms of strength and durability, the factory baths are commendable. Manufacturer gives 25 years warranty on their productsthat says a lot. Everything is in order with the pricing policy.