Choosing a roller shutter in the toilet - 9 useful tips

It would seem, what kind of roller shutters can we talk about when it comes to an ordinary toilet, i.e. room without windows. We are all used to seeing roller shutters on windows and the doors of apartments, private houses, shops and institutions where they have a protective function. In the toilet they are necessary to hide a lot of unsightly communications. Plumbing shutters appeared relatively recently and today have become one of the best ways to mask pipes, valves, counters, filters and water heaters, making the interior of the bathroom more harmonious and attractive. It remains only to choose the right roller shutters in the toilet, to determine the design, material of execution, installation features and design.

No. 1. Advantages and disadvantages of roller shutters in the toilet

Looking ahead, we note that the shutters are ideal way to mask all communicationslocated beyond toilet bowl. Someone may object that it’s easier to hide everything under a box from drywall or lining - it is aesthetically pleasing and inexpensive. Do not forget that you can’t hide communications tightly - there must be access to them, which is why a small hatch is provided in such boxes, but it often does not save, as its size does not allow normal access to all areas pipes. If something happens, you have to break the entire skin, and this is dirt, dust and long restoration work. In addition, if the hatch door is hinged, then it is necessary to provide a sufficient amount of space to open it, and if small bathroom, then this may cause problems.

All such drawbacks are deprived of plumbing shutters, and the rapidly growing popularity of these designs is explained their many advantages:

• the first and most important - roller shutters perfectly hide all communications;
• shutters can have almost any size, therefore, it will be possible to hide both miniature and rather large niches;
• in which case, to pipes, valves, meters access will be provided instantly - just raise the roller blind;
• shutters provide full access to all pipe sectionslocated in the toilet. When opening the canvas folds into a box located at the very top of the structure, without interfering with the inspection and repair work;
• construction takes minimum space. The most voluminous element is a box, but in most cases it can be deployed in the direction of the pipes;
• quick installation and a minimum of dirty work;
• ease of maintenance of the structure, the shutters are not afraid of moisture, will not rot, and to keep them clean, a simple wash is enough;
• ease of management;
• durability and the safety of appearance. Roller shutters are made of durable and safe materials using powder coating;
• Roller shutters not only do not ruin the interior, but can also decorate it. The design can be monophonic, any patterns and landscapes are applied to it using photo printing.Even more! The canvas can exactly repeat the tile pattern, and then no one, except yourself, will guess where the pipe system in the bathroom went;
• additional advantage - the ability to organize behind the roller shutters storage systemif, of course, the nature of the location of the communications allows this. The most unsightly, but very necessary items can be hidden away from the eyes, and if they are needed, you can get them in a matter of seconds;
• shutters increase sound insulation the toilet room and minimize the sound of water flowing through the sewer pipes. Manufacturers of similar designs are also talking about additional thermal insulation.

Cons plumbing shutters have virtually none. The main thing is the cost. They will cost more than a regular curtain made of fabric (a popular budget way to hide pipes), but in terms of functionality and aesthetics, these options are difficult to compare. A gypsum board box, by the way, will not come out much cheaper, and if you take into account that after some visits to the plumbing it may be necessary to repair it, then the roller shutter can be considered the most profitable and convenient option.

Among the minuses are often called electrostaticity and the ability to attract dust. In our opinion, this property is greatly exaggerated, and it is not worth giving special importance to it. Jalousie because, for example, they also need regular care - the main thing is that it is easy to clean the roller shutters, and the regularity of the cleaning will not make you regret your choice.

No. 2. How are plumbing shutters arranged?

Roller shutters designed for bathrooms do not fundamentally differ from those designs that are installed on windows and doors.

The main structural elements of plumbing shutters:

• canvasconsisting of many lamellas. Such a structure of the canvas provides its ability in assembled form to occupy a minimum of space;
• shafton which the web is assembled due to rotation;
• box, in which the shaft is hidden, provides a more aesthetic appearance of the structure and protects its elements from external negative influence;
• side guides provide smoother, more accurate and more comfortable web travel.

Roller shutters for the toilet are made of completely safe materials that do not emit toxic substances, do not be afraid of moisture, easy to clean. A conscientious manufacturer will provide all certificates of conformity without any problems. To be sure of the safety and durability of products, it is better to work only with trusted companies. Residents of Moscow can be advised by the Rollet-Market company, which has been working on the roller shutter manufacturing and installation market for 15 years.

No. 3. What to consider when choosing a roller shutter for a toilet?

Plumbing roller shutters differ in the mass of parameters, and, first of all, these are:

• lamella material;
• type of profile;
• type of locking element;
• type of mechanism that sets the web in motion;
• mechanism control type;
• dimensions of the structure;
• design.

Of course, few people want to install powerful steel shutters with a reinforced profile in the toilet. Rather, it is a great option for protecting window openings. A simpler design is suitable for a bathroom, but the individual nuances of its execution will, of course, depend on personal preferences, as well as the type of toilet (public or personal).

Number 4. Execution material, profile and lock

Bathrooms use shutters made of the same materials as window and door structures. The only exception is the wooden roller shutter. They are not often put on windows in our country, and in the toilet they will be completely inappropriate. Not only are they expensive, they are also not very resistant to moisture, and to preserve the appearance you will have to constantly process protective equipment.

Optimum toilet materials for the performance of roller shutters:

• plastic. This is the cheapest material, but by no means the worst.It is not afraid of moisture, it is easy to wash it (like ordinary blinds), it does not take corrosion and mold, and such a design does not weigh much. We add a huge variety of shades to the list of benefits, so that the plastic shutter fits into any bathroom. The main disadvantage is low strength, but if you are not going to lean on the structure, then everything will be fine with it. In terms of durability, plastic roller shutters, of course, are inferior to aluminum and steel;
• aluminum roller shutters are considered the best option for arranging a toilet in an apartment and a private house. They are available in terms of price, have sufficient strength, excellent appearance and high durability - the optimal balance of price and quality. Such shutters are not afraid of corrosion, have a relatively light weight, and due to the two-layer coating with heat-treated paint, the durability and resistance to moisture are increased;
• steel roller shutters are characterized by increased strength and wear resistance. For a home bathroom of this strength, even in abundance, but if we are talking about a public toilet, then this is perhaps the best option. It is recommended that you use stainless steel roller shutters so that after a few years you will not encounter the problem of corrosion.

As for type of profile metal structures, then for the home with the head, the simplest profile of roller rolling with foam filler is enough. This design will provide good heat and sound insulation, and its low burglar-proof qualities can be ignored. For a public bathroom, experts recommend steel reinforced burglar-proof shutters.

As the castle for the apartment, the simplest gate valve will be enough: none of the households will encroach on detergents and sponges, and access to them will be much easier. A full-fledged locking mechanism will be necessary only when installing plumbing shutters in a public place.

No. 5. Mechanism and control

By type of management toilet shutters can be:

• mechanical (driven by human efforts);
• automatic (driven by an electric drive after pressing a button on a wall or remote control).

There is no big sense in using an electric drive in sanitary shutters - these are light constructions, and it is not necessary to open them very often. Given that the design with automatic control is much more expensive, then this option can be safely swept aside.

Suitable for bathrooms mechanical drive. As a rule, two such variants are used:

• tape drive It is based on a tape that is attached to the shaft and the conveyor. It’s enough for a person to pull on the tape to bring the structure into action. This is a simple and cheap mechanism that can handle loads of up to 15 kg. In terms of convenience, this is not the best solution, it requires more effort than a spring-inertial mechanism. Such roller blinds cannot be fixed in an intermediate position. For openings less than 52 cm wide, a tape drive is the only option;
• spring inertia drive - the most modern and convenient. The design is designed so that it can be fixed in any position, i.e. if necessary, you can only open the opening if access to the entire space is not required. The control knob is located on the bottom rail. The process of raising and lowering such mechanisms is as simple as possible, but with a structure width of less than 52 cm, it is impossible to place a spring in it, so the drive cannot be called universal.

No. 6. Dimensions of plumbing shutters

Roller shutters are made to order, taking into account the individual characteristics of a particular room. It is important that the design provides free access to all communications, therefore, in most cases, experts consider the best option for roller blinds from ceiling to floor.

Companies that manufacture and install such structures measure the existing niche, and many companies do it for free. Self-measurement is also possible - roller shutter manufacturers give instructions on how to do this correctly. It is important to consider not only the width and height of the future design, but also take into account the depth of the niche, because the type of installation of roller shutters depends on this parameter. The tightness and the absence of drafts in the future depend on the accuracy of the measurements taken.

Some companies offer so-called standard sizes. Well, if they exactly fit into the opening - you can save a lot of money. More often, you have to redo the niche, expand or narrow it, and as a result, all these works are more expensive than ordering a roller shutter with the necessary parameters.

Production will cost much more custom-made roller shutters (arched, triangular, etc.). They are not easy to install in the bathroom, and from a purely functional point of view, they lose to the simple and familiar rectangular version.

Number 7. Color and design

Plumbing rolling shutters can successfully mask all communications and not spoil the interior. In order for the design to fit into the bathroom space as organically as possible, when choosing, you need to take into account the color scheme used and decide whether you want to turn the roller blinds into an interior accent, or, conversely, you need to attract a minimum of attention.

Manufacturers make rolling shutters of any color, and with the advent of UV printing, it is also possible to apply images. All possible design options for roller shutters in the toilet can be divided into the following groups:

• roller shutters exactly the color of the walls. Since you can apply almost any shade to the canvas, choose a color that matches the tone tileswill be easy. The more precisely the colors match, the less invisible the shutters will be;

  

  

  

  

  
  
• contrasting roller shutters people who don’t like boring plain interiors will like it, even when it comes to the interior of the toilet. It is important to correctly combine the colors and not overdo it with the number of shades in this small room, so it is better to highlight two, maximum three colors, which will be used in the room. For example, if the walls are beige and the shutters are blue, then they can be supported in blue. a rug;
• photo roller shutters - the most interesting, but also the most expensive option. Previously, for applying the image used film, but very quickly this coating began to wear out, especially in places of contact with the guides. By the way, unscrupulous manufacturers are still using this technology. The modern way of drawing a picture is UV printing. The pattern created in this way retains its original appearance for at least 6-7 years, is resistant to moisture, does not fade. The catalogs of companies have a huge number of ready-made images: flowers, landscapes, architecture, animals, cartoon characters, patterns, various kinds of ornaments - there really are plenty to choose from. It’s easy to find the right color scheme and theme for your drawing. any type of interior. If nothing was found, then you can apply any desired image, for example, a photo brought from vacation. You can even apply a pattern that exactly repeats the pattern of a tile or wallpaperTrue, this will require the help of designers.

  

  

  

  

  
  

The easiest option is white roller shutters. This is a universal and win-win color - it will definitely fit into any interior. The most advantageous such design will look against the background of white and light walls, but in other cases it will be appropriate.

Number 8. Installation method of plumbing shutters

It is best to mount the roller shutters during toilet room repairwhen pipes have already been replaced, meters, filters, water heaters, etc. are installed.Firstly, it is already clear what equipment needs to be hidden and where to install the roller shutters. Secondly, installation costs are significantly reduced.

There are only three options for installing roller shutters in the toilet, and they differ only in the location of the box:

• installation inside the box. The most optimal option in terms of aesthetics. The box, the most massive part of the structure, hides behind the canvas, and when closed, we get a perfectly flat surface. It is important that the depth of the niche allows you to place the box there. Measurements are best done after leveling the walls, to mounting tilesso that the structure is eventually flush with the wall. If the tile has already been laid, such installation is also possible, but it is better to consult with the manufacturer about the correct measurement of the opening;
• outward installation performed when the depth of the niche does not allow to place the box there. Measurements and installation are carried out after all facing works, fastening is carried out on a tile. It is important to consider the length of the canvas - it should fit freely in the box, completely freeing the opening;
• installation of the box overlay used when the wall is made of drywall and can not withstand heavy loads. The box is located only outside, the design is complemented by a lower guide. Ceiling mount not required.

No. 9. Features of installation of roller shutters in the toilet

The easiest way to install roller shutters is the company that manufactured them - the vast majority of manufacturers provide installation services. At the same time, you get the confidence that the design will be installed correctly, without distortions and errors. However, if there is some preparation and self-confidence, then you can try to install yourself. Savings are guaranteed.

The sequence of work is as follows:

• installation of the box. Decorative protection is removed from it, after which it is mounted either between the walls of the niche, or on the wall in which the niche is formed. In the right places on the walls puncher holes are made, plugs are inserted into them, after which it is installed self-tapping screw or dowel. It is important that the box is installed clearly horizontally;
• the installation of the pretended plank is carried out in the previously designated holes;
• installation of guides. After measuring the distance between the bottom of the drum and the mock bar, both guides are sized to fit. They are mounted on screws in the end of the niche. Mounting the canvas will be easier if you simultaneously wind it in both guides, and only then completely fix them to the wall.

If you have doubts crept in that you can’t do it on your own, it’s better not to waste time and not spoil the design, but immediately call specialists.