TOP 9 major manufacturers of tongue-and-groove plates

For the construction of internal partitions, tongue-and-groove plates are increasingly used. They are easy to install, lightweight, cheap, environmentally friendly and vapor-permeable, excellent in processing and do not carry significant loads on the floors of the house. To take advantage of all these advantages and build a durable reliable partition, experienced experts advise you to pay attention when choosing not only the dimensions and declared properties of the material, but also the name of its manufacturer. Let us dwell on the largest companies specializing in the manufacture of tongue-and-groove plates.

Knauf

German company Knauf is one of the leading players in the global and domestic market of tongue-and-groove plates. The history of the enterprise began in the 30s of the last century with the processing of natural gypsum; later, a production plant was opened dry building mixes on the basis of gypsum, then a plant for the production of drywall sheets. The company has developed rapidly, and today is group of companiesoffering solutions in the field of dry construction, produces materials for insulation and decoration. Knauf is the guarantee of the highest quality, as the factories use the most modern and accurate equipment, and strict compliance with strict standards is constantly monitored.

Company tongue-and-groove plates differ perfect geometry and highest precision alignment, which allows you to quickly and easily build partitions even for beginners in this matter. The assortment of the company has standard and moisture resistant boards with a thickness of 80 and 100 mm. You must pay for the highest quality - the company’s tongue-and-groove plates are more expensive than domestic counterparts.

LLC Volma

Tongue-and-groove plates under the Volma trademark occupy more than half of the domestic market and are in growing demand. Launches their factory in Volgogradexisting since 1943. Today, the company's production facilities are located in several cities of Russia and are engaged in plaster productionassembly mixtures, tile adhesives, primers, thermal insulation materials, drywall and tongue-and-groove plates. Over the past few years, the volume of production of the latter has been increased several times, as the demand for products is constantly growing.

The popularity of Volma plates is explained by their high quality - experts consider the company's products a worthy alternative to the German leader in the field Knauf, but at the same time it costs domestic products much cheaper. The company claims that it was able to achieve such success thanks to its customer orientation, continuous improvement and a systematic approach.

It is easy to work with tongue-and-groove plates of the company, they allow to achieve excellent results. Are issued solid and hollow, standard and moisture resistant boards with a thickness of 80 and 100 mm. Slabs 100 mm thick at the height of construction work are not so easy to find on sale. The manufacturer adds fiberglass to the products to increase strength. The presence of hollow core slabs with significantly lower weight and better heat and soundproof characteristics distinguishes domestic products from European.

LLC "Magma"

A large domestic manufacturer of tongue-and-groove plates LLC "Magma" is included in members of the Magma group of companies, whose plants are engaged in the extraction and processing of various minerals. Magma LLC specializes in the manufacture of drywall sheets, dry mortar and tongue-and-groove plates. The latter are familiar to customers as "MAGMA gypsum boards." Since the company uses excellent raw materials, proven technology and modern equipment, the quality of the products is high.

The tongue-and-groove plates of the company appeared on the market only in 2012, but they already managed to gain popularity among builders. Products praised for strength, reliability, good geometry and appearance. It is convenient that the plates can be equipped with special adhesives of the manufacturer. Assortment presented standard and moisture resistant slabs, solid and hollow 80 mm thick.

LLC "Peshelansky gypsum plant"

The plant was built in 1933 on the basis of a gypsum deposit and specialized in the extraction and primary processing of gypsum. The gypsum mined here has always been of very high quality, which is why the tongue-and-groove plates, which began to be produced here in 2002, turned out to be strong and reliable. Production is constantly being improved and modernized, volumes of manufactured products and its assortment are growing. Own raw material base in combination with new equipment and the desire to create the highest quality products ensured the enterprise success in the domestic market.

At the moment, the manufacturer produces 80 mm thick boards. They can be hollow or solid, moisture resistant and standard. Company Feature - Manufacturing shungite tongue-and-groove plates. They are made to order, their cost is 2 times higher than ordinary plates, but the properties are unique: suppression of the growth and reproduction of viruses and bacteria, a decrease in the level of electromagnetic radiation.

Gypsopolymer OJSC

Since 1953, the company specializes in the production of gypsum sheets. Cooperation with nuclear energy enterprises in those years made the plant stand out and made it possible to speak of a high production culture and the highest quality of products. Today, the company boasts own raw material base and the presence of a full production cycle. It uses modern high-tech equipment, innovations, and the range of products and its volumes are constantly expanding. Factory produces plasters and putties, mounting mixtures and Self-leveling floorsas well as gypsum building and tongue-and-groove plates.

At the moment, the manufacturer's range of tongue-and-groove plates includes solid and hollow slabs 80 mm thick standard and moisture resistant, and full-body moisture-proof and standard plates with a thickness of 100 mm. All products are distinguished by good geometry and ease of installation.

CJSC Samara Gypsum Plant

The company is deservedly one of the largest in the gypsum industry. It has been operating since 1944, in Soviet times it was a leader in its field, producing a record number of products. Today, the plant offers dry building mixes and gypsum products, which are used in 13 different industries and exported to the markets of the near abroad.

In 2003, the production of tongue-and-groove plates was mastered and since then their range has been constantly expanding. The company produces small (600 * 300 mm) and standard (667 * 500 mm) tongue-and-groove plates. Conventional and moisture resistant boards are presented, 80 and 100 mm thick. High quality and a large selection of products ensures a consistently high demand for the company's products.

Belgips OJSC

Products of this Belarusian enterprise It is also represented in the domestic market and is in demand. The plant was founded in 1944 and specialized in the production of gypsum and gypsum products for construction, later gypsum partition plates were produced, and the production of gypsum plasterboard was established.Today, the product range has been expanded, but is still focused on the production of gypsum and gypsum boards. Product quality is confirmed by certificates of conformity and awards of various exhibitions.

Tongue-and-groove plates since 2005 let out in standard and moisture resistant 80 mm thick. Their significant advantage is an even, smooth surface, so applying a leveling layer is not necessary. Production is carried out in accordance with ISO 9001-2001. Now the plant is conducting a comprehensive modernization, changing equipment, improving the recipe. In 2014, the company was acquired by Volma, due to which the quality of the products offered to the buyer under the old Belgips brand was significantly improved.

Gypsum Concrete OJSC

The company has been operating since 1963 and today is one of the leaders in the domestic production of tongue-and-groove plates and dry mixes. The product range is small and includes only full-bodied standard and moisture resistant boards 80 mm thick. Despite this, the product received a lot of positive reviews for its correct geometry and the exact combination of the groove and the ridge.

JSC Sverdlovsk Plant of Plaster Products

A large Ural enterprise specializes in the production of gypsum products under the GIFAS trademark. In addition to gypsum products, the company produces dry building mixes and concrete products. The company has been leading the history since 1959 and today has high-tech equipment to produce high-quality products. Assortment presented solid standard and moisture resistant plates with a thickness of 80 mm. Products have a smooth surface, accurate dimensions, are easily sawn and mounted.