TOP 25 largest manufacturers of welding electrodes

The store supplies products throughout Russia, has a high level of service, speed and sells only those products whose quality is confirmed by relevant certificates. Thanks to extensive warehouse reserves, shipment and delivery are carried out as quickly as possible. Electrodes for welding are presented in a wide range, so users can find the option that is necessary in each case. The company trusts only the most reliable manufacturers, and we will dwell on them.

TOP 10 Russian manufacturers

NPP "Welding of Eurasia"

The company NPP "Welding Eurasia" produces electrodes under the brand name SpetsElektrod and is present a leader in domestic production of electrodes. The company was founded more than 70 years ago and today produces electrodes for welding, cutting and surfacing of various metals and alloys for structures for various purposes. The manufacturer boasts a full production cycle, from the preparation of raw materials to the release of finished electrodes. The range of manufactured electrodes includes about 190 marks - One of the highest rates among companies in the post-Soviet space. In the domestic market of the country to the manufacturer owns a share of more than 30%. Products are in demand in the countries of the near abroad.

JSC "Electrode Plant"

The history of the enterprise begins in 1944, and since then it has always played a crucial role in the development of the country's industry. Today it is a leading domestic manufacturer of electrodes, whose products used in engineering, metallurgy, shipbuilding, mining enterprises. The quality of the electrodes of ZAO ELZ is confirmed by compliance with the most stringent standards. The company uses the ISO 9001: 2008 quality management system. Despite the fact that the company's electrodes are well known to domestic welders and are in high demand, the manufacturer does not stop offering new developments.

LLC NPO Spetselektrod

The company specializes in design and manufacture of welding electrodes for welding various constructions of steel, non-ferrous metals and alloys. At the moment, the Volgodonsk company produces dozens of different brands of electrodes. The equipment allows the production of electrodes of the highest quality with a diameter of 1.6 to 6 mm. In addition, the company has a large the laboratorywhere pilot batches of products are produced, new brands are being developed. At the request of the customer, electrodes with specific predetermined characteristics can be developed and produced. Over the years, the company has developed and released over 50 new brands electrodeswhich are in high demand today.

OJSC Losinovsky Electrode Plant

This company is also one of the leaders in the domestic production of welding electrodes. It has been working for over 60 years, is actively developing, and today its share in the domestic market of the country exceeds 20%. The production is equipped with modern reliable equipment, which allows us to produce high-quality products. The company's specialists are constantly working on development of new brands of electrodes, and many of those that appeared here today are actively used in various fields of industry and in the national economy.

Penza Electrodes OJSC

The plant has been operating since 1963, and supplies welding electrodes to all regions of Russia. These electrodes gained high popularity among domestic welders thanks to excellent value for money. Today, the company has already gone beyond the Russian market and supplies products to neighboring countries.

LLC Zelenogradsk Electrode Plant

This is a relatively young enterprise, its history dates back to 2000, but has since managed to establish itself perfectly. Among the main advantages of the manufacturer are high quality and a wide range of products, so the company's welding electrodes instantly began to be in demand in all regions of Russia.

LLC Sychevsky Electrode Plant

The company produces electrodes for general and special purposes, designed to work with various alloys and metals. Production mastered more than 40 different brands of electrodes, for the manufacture of which modern equipment is used. By agreement with the customer, it is possible to produce a batch of electrodes with the necessary parameters. All products go through strict quality control before sending to retail chains.

CJSC "KOMZ-Export"

The young company from Kamensk-Shakhtinsk, founded in 1999, is now well known under the TIGARBO trademark. Among other products, the company produces welding electrodes of various grades that meet the requirements of world standards. The assortment of electrodes is constantly growing, deliveries are carried out in almost all regions of the country.

LLC Novooskolsky Electrode Plant

The company was included in the list of the best, as in recent years it has demonstrated fast production growth. Thanks to the modernization policy, all equipment was updated, and today electrodes are made on Swiss equipment, which allows us to talk about the high quality of products. At the moment, the manufacturer has headed for expanding the range, therefore, it is introducing new brands of electrodes into production.

LLC "Roteks"

The Krasnodar plant has been producing welding electrodes for a little over 15 years, during which time it has mastered the production of electrodes for working with various types of steel, cast iron and aluminum alloys. The products meet high international quality standards, as the production is carried out on modern equipment. The company collaborates with research centers that develop new brands of electrodes for it.

TOP 6 global manufacturers

Esab

Swedish company Esab was founded more than a century ago, in 1904, and its creator was O. Chellberg, known as the inventor of the coated electrode. Today, the company bears the title of world leader in the production of equipment and materials for welding. The company includes 30 industrial enterpriseslocated in different countries, and the products are widely represented on all continents. The company achieved world recognition due to the constant introduction of innovations and the highest quality of its products.

The manufacturer’s assortment includes electrodes for welding a wide variety of metals and alloys: for alloyed and unalloyed steels, aluminum alloys, etc. Choosing the most suitable electrode among dozens of different options will be easy.The most widely used electrodes were OK 53.70 for welding critical structures of alloyed low-carbon steels and OK 74.70 for welding high-strength alloyed steels.

Kobe steel

This company is considered one of leading steel industry in Japan. Founded in 1911, today produces a wide range of products under trademarked Kobelco. Since the middle of the last century, the company has been firmly holding world leadership in welding materials for aluminum alloys, steels and other multicomponent alloys. The quality of the products and allowed the company to achieve worldwide recognition. Despite the fact that the range of manufactured electrodes includes dozens of different options, in the domestic market the LB 52U electrodes are especially popular, which are ideal for welding high pressure oil and gas pipelines and were used to build the largest facilities.

Klöckner & Co SE

German companyspecializing in steel production. Founded in 1906, today includes production located in different countries of Europe. Among other things, produces consumables for welding. The manufacturer constantly monitors the quality of its products, improves them, and therefore has gained trust around the world. Domestic welders often use electrodes from Kessel 5520 and Phoenix K 50 R.

Capilla

Another one German companywhich boasts 50 years of experience in the field of electrode manufacturing. The range includes electrodes for welding aluminum alloys, cast iron and steel, copper alloys and other compounds. The manufacturer also captivates with the highest quality of products, which is why experts in 40 countries around the world choose Capilla electrodes for welding.

S.I.A. "RESANTA"

Famous Latvian manufacturer started its activity in Riga in 1993. Today electrodes under the brand name "Resanta" very well known to the domestic buyer and won his trust. Particularly attracted by the excellent value for money. The latter has been repeatedly confirmed by prestigious awards at major international exhibitions. The company's electrodes are designed for welding steel structures for various purposes.

Lincoln electric

Today american company Lincoln Electric is known as a major manufacturer of products for welding and cutting. At the disposal of the company over 40 enterpriseslocated in North America as well sales offices in 160 countries, including and in Russia. The history of production began back in 1895, when the founder John C. Lincoln began to produce electric motors. The production of electrodes is the main activity of the company, so in the assortment you can find electrodes for welding different types of steel, cast iron, aluminumNickel and copper alloys. Products are widely represented in the domestic market.

TOP 5 Belarusian and Ukrainian manufacturers

LLC "Vatra"

Belarusian manufacturers of electrodes are also interesting for domestic welders, as they are perfectly balanced in terms of price and quality. One of the leading enterprises in the Belarusian market is Vatra LLC. It has been working since 1992, and since then has managed to master the production of a wide range of welding electrodes and some related materials. Cooperation with leading institutes of electric welding in Ukraine and Russia allowed us to establish the most professional production. Today, the company's electrodes are widely used in industry and the national economy of Belarus, and are also exported to neighboring countries.

LLC Svetlogorsk Welding Electrodes Plant

This enterprise is considered one of the leaders in the field and produces about 1600 tons of products every month, uses modern equipment. Production turnover is constantly increasing, as demand for products is growing both in the Belarusian market and abroad. Electrodes are made under the trademarks “Monolith”, “Continent”, “Standard” and “Arsenal”.

Oliver LLC

The company has gone from a small company established in 1993 to the largest enterprise in the industry. Today, electrodes for welding various constructions of cast iron, high- and low-alloy steels, as well as surfacing electrodes are produced here. The number of different brands already reaches hundreds, while the company is constantly introducing new types of electrodes into production. Representative offices of the enterprise work not only in all regional centers of Belarus, but also in Russia.

PJSC "PlasmaTech"

The largest Ukrainian manufacturer welding electrodes produces over 2000 tons of products per month, which is in demand not only in the domestic market, but also in Russia, Belarus, Poland, Latvia, the Czech Republic and some other countries. It uses innovative technologies, strict quality control, which allowed the company to become a well-known manufacturer of electrodes, which are used in mechanical engineering, metallurgy, construction and agricultural enterprises, as well as private buyers.

OZSO them. E.O. Patona

Well-known enterprise far beyond Ukraine It has been operating since 1959 and today produces a wide range of welding equipment and related products. The manufacturer’s products are a kind of quality mark, because powerful design department constantly working on improving products. Among other products, electrodes of a huge number of grades are produced, the plant accepts orders for the manufacture of electrodes of any necessary grades.

TOP 4 Chinese manufacturers

Golden bridge

It's no secret that Chinese products have flooded the whole world, and welding electrodes are no exception. Trusting anonymous companies is not worth it - it is better to use proven products. The largest Chinese manufacturer of electrodes is Golden Bridge. The company uses modern equipment, carries out strict quality control, so the electrodes more than 200 different brands used all over the world. The company has been certified according to ISO 9001: 2000.

ELKRAFT

welding equipment and related products under this trademark are manufactured by Changzhou Yangzi River Welding Materials, which has existed since 1958. For now products are exported to Europe, the USA and Russia, where it is in great demand, because it is of high quality and reasonable price.

Goldspark

This Chinese company produces a wide range of products, including and electrodes designed for welding critical and household structures made of steel and cast iron. Products are widely represented in the domestic market.

Jasic

Chengdu Jasic Technology specializes mainly in the production of welding equipment, but also produces welding electrodes in a small assortment. Products are delivered to different parts of the world, they can be found on sale and in the domestic market.